International Journal on Magnetic Particle Imaging IJMPI
Vol. 6 No. 2 Suppl 1 (2020): Int J Mag Part Imag
https://doi.org/10.18416/IJMPI.2020.2009042

Proceedings Articles

Iron core coil designs for MPI

Main Article Content

Fynn Förger (UKE Hamburg, TU Hamburg), Matthias Graeser , Tobias Knopp 

Abstract

In Magnetic Particle Imaging, much of the power consumed during an imaging sequence is used for the generation of the selection and focus fields. In today’s MPI scanners three different concepts are applied to generate the gradient fields: Air coils, permanent magnets and coils with soft iron. Air coils and permanent magnets have the great advantage of good calculability by the Biot-Savart Law. On the way to a clinical imaging modality, the needed power for sufficient gradient strength demand the use of soft iron. In order to make good use of the ferromagnetic amplification properties, much more complex simulations have to be done. A recently published head scanner uses a soft iron yoke for field generation. In this study, we investigated different coil geometries with soft iron with respect to this head scanner.


 


Int. J. Mag. Part. Imag. 6(2), Suppl. 1, 2020, Article ID: 2009042, DOI: 10.18416/IJMPI.2020.2009042

Article Details

Most read articles by the same author(s)

<< < 5 6 7 8 9 10